Filter
Top Products
Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-24 Matrix NSA Series Configuration Guide
Command Defaults
• If port-string, rule status, storage type, Syslog state, trap, and usage-list are not
specified, all rules related to other specifications will be displayed.
• If verbose is not specified, summary information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
data (Not required for ipfrag classification.) Displays rules for a
predefined classifier. This value is dependent on the
classification type entered. Refer to Table 8-3 for valid
values for each classification type.
mask mask (Optional) Displays rules for a specific data mask. Refer to
Table 8-3 for valid values for each classification type and
data value.
port-string
port-string
(Optional) Displays rules related to a specific ingress port.
rule-status active
| not-in-service |
not-ready
(Optional) Displays rules related to a specific rules status.
storage-type
non-volatile |
volatile
(Optional) Displays rules configured for either non-volatile
or volatile storage.
vlan vlan (Optional) Displays rules for a specific VLAN ID.
drop | forward Displays rules based on whether matching packets specified
by the vlan parameter will be dropped or forwarded.
dynamic-pid
dynamic-pid
Displays rules associated with a specific dynamic policy
profile index ID.
cos cos (Optional) Displays rules for a Class-of-Service value.
admin-pid
admin-pid
Displays rules associated with a specific administrative
policy profile index ID.
-verbose (Optional) Displays detailed information.