Fujitsu N1800 Scanner User Manual


 
149
4.12.2 Setting the FTP Server Folders
A list of FTP server folders may be set as [Save] targets for scanned data.
Any FTP server folder can be specified as an FTP server folder.
Up to the total of 100 FTP server folders and network folders can be added.
For details about setting network folders, refer to "4.12.1 Setting the Network Folders"
(page 143).
For details about setting a file name for scanned data to be saved in an FTP server folder,
refer to "4.12.4 Setting a File Name Format for When Saving Scanned Data" (page 156).
Registering an FTP Server Folder
1. Select [Network Settings] J [FTP Server Folder] J [FTP Server Folder].
D The [FTP Server Folder] window appears.
Central Admin
Console
Note the following when registering an FTP server folder.
z The FTP server folder is registered as a network path. If the FTP server folder is on
a Windows file server and the length of the full Windows path including the file
name exceeds 259 characters, the scan data will not be saved. Before registering a
FTP server folder, check that the length of the full file path+name is not likely to
exceed 259 characters.
z If the selected folder was created using a language foreign to that of the browsing
operating system, the FTP server folder may not register correctly.
If the name of the FTP server folder contains unrecognizable characters, check the
codeset used.
z For FTP path, user name, and password, alphanumeric characters and symbols
with the exception of " \ / : ; * ? " < > | # & % " can be used.