Fujitsu N1800 Scanner User Manual


 
87
4.2.3 Administrator Login: via the Admin Tool
The Admin Tool can be set up to manage the scanner via a computer.
This section explains how to login using the Admin Tool.
When an administrator or user is already logged into a scanner, login via the Admin Tool
is not possible.
However, if automatic login is set, login via the Admin Tool is possible while the main
menu or job menu is displayed.
z If the normal screen display does not appear (for example: an "X" mark appears),
wait for a few minutes and try again. If the problem still occurs, contact your
FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
z If a button is rapidly pressed many times in succession, a "Connection error"
message may appear. In this case, wait for a few minutes and try again.
z For details about setting up to manage the scanner via a computer, refer to "1.4.1
Requirements for Admin Tool" (page 46).
z The default user name and password for the administrator are set as follows:
User name: admin
Password: password
z The scanner setup can be configured by one user.
z Session timeout time is 20 minutes (fixed). The session timeout time is extended by
a further 20 minutes for the following:
z when a menu button is pressed
z when the [OK] button is pressed