Filter
Top Products
457
■ Action
When connecting using the scanner name, the connection will be an intranet connection. When
connecting using an IP address, it will be an internet connection. If the URL includes a scanner
name, the scanner will be connected using an Intranet Zone. If the URL includes an IP address,
the scanner will be connected using the Internet Zone.
Try the following settings for the corresponding zone.
1. In Internet Explorer, set the following settings in the [Tools] menu, [Internet Options].
2. Enable active scripting in either of the following ways.
zOn the [Security] tab, click the [Default level] button to set [Security level for this zone] to
[Medium].
zOn the [Security] tab, click the [Custom level] button to set to [Enable] for [Active scripting]
under [Scripting] in the [Settings] area.
3. If connecting via the Internet zone, on the [Privacy] tab, set the level to below [Medium High].
4. Delete temporary internet files in either of the following ways:
zFor Internet Explorer 6.0
On the [General] tab, press the [Delete Files] button on the [Temporary Internet Files].
zFor Internet Explorer 7.0
On the [General] tab, press the [Delete] button on the [Browsing history], and press [Delete
Files] button on [Temporary Internet Files].
zFor Internet Explorer 8.0
On the [General] tab, press the [Delete] button on the [Browsing history], then select the
[Temporary Internet Files] check box and press [Delete] button.
■ Action
Press the power button to start the scanner.
■ Action
Set the proxy server to not be used.
1. In Internet Explorer, set the following settings in the [Tools] menu, [Internet Options].
2. Press the [LAN settings] button on the [Connections] tab.
3. Clear the [Use a proxy server for your LAN (These settings will not apply to dial-up or VPN
connection).] check box.
■ Action
Check if SSL is enabled on the [Admin Connection] window.
For details, refer to "4.8.8 Setting the Admin Connection" (page 123).
In Internet Explorer, the security level for the target zone is set to [High]
on the [Security] tab in the [Tools] menu -[Internet Options].
In the case of a custom level, [Prompt] or [Disable] is set for [Active
scripting] under [Scripting] in the [Settings] area.
The scanner is in standby mode.
A proxy server is being used.
There is an error with the connection protocol setting.
There is an error with the port number setting.