263
5.10 Installing an Add-in
An Add-in for scanner can be installed by uploading an Add-in module and setting update
calls. Up to six Add-in modules can be installed.
The new Add-in update module will be released, and applied to the scanners when one of
the following occurs:
z Scanner is started, or resumed from the standby mode
z Scanner is logged out
z Scanner is notified of any update modules
z Scanner has an automatic update scheduled
When update calls are set up, updates can be applied to the scanners that are in power-
off or standby mode using Wake-On-LAN.
If the Add-in module is already available, the module is replaced. However, if the date of
the last modified Add-in module version is the same as, or earlier than the currently
available one, the module cannot be uploaded.
1. Press the [Admin Operations] button in the Central Admin Console main
window.
D The [Scanner Admin Operations] window appears.
2. Select the [Add-in Installs] link.
D The [Add-in Installs] window appears.
Add-ins can be updated according to the time specified on the scanner side.
For details, refer to "4.8.9 Setting a Central Admin Server" (page 125).