Filter
Top Products
267
3. In [Settings Groups], select a settings group to which the new set of
scanner settings is to be registered.
D [Registered Scanner Settings] shows the release date of the currently available
system settings.
4. In [Model], select [N1800].
5. Press the [Edit Scanner Settings] button.
D The scanner settings edit window appears.
6. Configure the scanner settings.
If scanner settings are available, the available scanner settings values are shown.
If no scanner settings have been released, the default settings are shown.
z [System Settings] tab
The setting items are the same as those set in the system settings menu in the
window for administrator operations. For details, refer to "4.5 Configuring the
System" (page 94).
However, the [Import Scanner Settings] button for the [System Settings] menu is
only displayed on the job mode edit window of the Central Admin Console.
To cancel release of the scanner settings, press the [Cancel] button to delete
the scanner settings.
If the scanner settings are canceled, checking or changing the settings
contents becomes difficult. Also, editing and viewing of the network printers/
folders setting contents on the job mode edit window may not be possible. For
details, refer to "Updating the Scanner Settings" (page 266).
If you return to the [Main Menu] from the [Scanner Settings] window without
registering the scanner settings, the edited contents will be lost.