Filter
Top Products
159
4.13 Setting the Network Printers
Set a printer connected to the network.
The procedure for setting a network printer is as follows.
1. Check the printer driver.
For details, refer to "Checking the Printer Drivers" (page 160).
2. Set the printer properties.
For details, refer to "Setting the Printer Properties" (page 161).
3. Register the network printer.
Up to 100 network printers can be registered.
A network printer can be registered in the following ways.
z Network Tree
Select a network printer from the network tree.
For details, refer to "Registering a Network Printer (Network Tree)" (page 164).
z Network Path
Directly enter the network printer path name.
For details, refer to "Registering a Network Printer (Network Path)" (page 167).
Central Admin
Console
z Read the printer manual beforehand for information about setting a printer, adding a
network printer, and other cautions.
z Make sure that there is enough space in the drive before printing.
z Do not set a virtual printer.
z If a printer connected to different print servers is to be registered as a network
printer multiple times, the software version of the driver should be the same on each
print server.
If the software version of the printer driver differs, printing errors may occur.