Fujitsu N1800 Scanner User Manual


 
8.3 Other Troubleshooting
460
Scanner Cannot Be Turned On
Check item
Has the power button been pressed?
Action
Press the power button.
Check item
Are the AC cable and AC adapter properly connected to the scanner?
Action
z Connect the AC cable and the AC adapter.
z Disconnect AC cable from the scanner to turn off the scanner, and connect the cable again.
After turning the power off, wait for at least 10 seconds before turning the power back on
again.
If the problem persists even after taking the above mentioned actions, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
Scanner Does Not Start Up
Check item
After turning the scanner on, was the power turned off immediately?
Action
z Press the power button.
z Disconnect AC cable from the scanner to turn off the scanner, and connect the cable again.
After turning the power off, wait for at least 10 seconds before turning the power back on
again.
If the problem persists even after taking the above mentioned actions, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
Check item
After turning the scanner off, was the power turned back on again
immediately?
Action
Press the power button.
Scanner cannot be turned on.
The "The last attempt to restart ..." message is shown on the window
and the scanner does not start up.
Scanner does not resume from standby mode.