Filter
Top Products
337
6.6.1 Scaling
Set the print size for the scanned data.
The setting selected here will be used every time the user prints a document.
1. On the [Print] window, press the [Scaling] button.
D The [Scaling] window appears.
2. Select the print scale of the scanned data.
Printing results will vary as shown below, depending on the positioning setting. For
more details on the positioning setting, refer to "6.6.2 Positioning" (page 341).
z Shrink to Fit
The image is reduced so that the entire image fits into the area available for
printing (area inside the dotted line). Further enlargement is not possible.
z If the positioning setting is [Center], the control point for printing is the center
point of the area available for printing.
z If the positioning setting is [Top Left], the control point for printing is the top left
corner of the area available for printing.
A
vailable Area
for Printing
Control Point
Center
Control Point
Top Left
Available Area
for Printing