Filter
Top Products
February 2002 © TOSHIBA TEC 3 - 15 FC-210/310 PREVENTIVE MAINTENANCE
3.6.3 Checking and cleaning of the drum cleaning blade and transfer belt cleaning blade
(1) Handling precautions
Since the edge of the cleaning blade performs the cleaning operation, pay special attention when handling
it:
• Do not allow any hard object to hit or rub against the blade edge. Do not rub the edge with a cloth or
soft pad.
• Do not stain the edge with any oil or fingerprints, etc.
• Do not allow solvents such as paint thinner to touch the blade.
• Do not leave any lint or dirt on the blade edge.
• Do not place the blade near a heat source.
(2) Cleaning procedure
Clean the blade edge lightly with a cloth moistened with water.
3.6.4 Checking and replacing the transfer belt
(1) Handling precautions
• Do not touch the belt surface with your bare hands.
• Prevent oil or other foreign matter from staining the belt surface.
• Do not allow alcohol or any other organic solvent to come into contact with the transfer belt.
• Do not apply external pressure that might scratch the transfer belt.
3.6.5 Checking and replacing the transfer roller and fuser roller
(1) Handling precautions
• Do not touch the roller surface with your bare hands.
• Be carefull not to leave any scratch or dent on the roller surface.
3.6.6 Checking and cleaning of the fuser belt and lower heat roller
(1) Handling precautions
Fuser belt
• Take great care not to let the belt surface be folded.
• Do not touch the belt surface with your bare hands.
• Prevent oil or other foreign matter from staining the belt surface.
• Do not allow alcohol or any other organic solvent to come into contact with the fuser belt.
• Do not apply external pressure that might scratch the fuser belt.