Filter
Top Products
February 2002 © TOSHIBA TEC 1 - 13 FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
[1] ——
[2] — Color registration sensor (front) "0" is displayed with reflection at
(Sensor LED is turned ON by output check 03.) transfer belt.
[3] — Color registration sensor (rear) "0" is displayed with reflection at
(Sensor LED is turned ON by output check 03.) transfer belt.
[4] — Image quality sensor
Sensor output value is displayed with 10 bits.
[5] ——
A ADF aligning sensor 1: Original present
B ADF exit sensor 1: Original present
C ADF open/close sensor 1: ADF is opened.
[6]
D ADF empty sensor 1: Original present
E ADF size sensor 1
F —
G ADF size sensor 2
H ADF unit is installed or not 1: ADF unit is installed.
A —
B —
C —
[7]
D —
E —
F Carriage home position sensor 1: Carriages are at home position.
G —
H Platen sensor 1: Platen cover is closed.
A —
B —
C —
[8]
D APS sensor (APS-R) 1: Original present
E APS sensor (APS-C) 1: Original present
F APS sensor (APS-3) 1: Original present
G APS sensor (APS-2) (for A4 series) 1: Original present
H APS sensor (APS-1) 1: Original present
[9] — SCM board input 24V check Output value is displayed with 8 bits.
[0] ——
Digital key Icon Item Condition
[FULL COLOR]key: OFF, [AUTO COLOR]key: ON, [ENERGY SAVER]key: ON