Filter
Top Products
February 2002 © TOSHIBA TEC 1 - 21 FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
221 Automatic filling of Color (Y, M, C) – 0~255 Fills the developer from the developer 5
developer material cartridge (about 3 min.) and then adjusts
and automatic ad- the auto-toner sensor output to set in the
justment of the auto- range of 3.50~4.50V (about 2 min.).
toner sensor (As the value increases, the sensor out-
put increases correspondingly.)
223 Developer bias DC (–) Y 136 0~255 As the value increases, the transformer 1
224 output adjustment M 136 0~255 output increases. The adjustment value 1
225 C 136 0~255 becomes effective only when the setting 1
226 K 136 0~255 mode (08-400,401,409) is 0 (disabled). 1
241 Main charger grid bias Y 120 0~255 As the value increases, the transformer 1
242 output adjustment M 120 0~255 output increases. The adjustment value 1
243 C 120 0~255 becomes effective only when the setting 1
244 K 120 0~255 mode (08-400,401,409) is 0 (disabled). 1
245 Automatic adjust- All (Y,M,C,K) – 0~255 Auto-toner sensor output is adjusted 5
246 ment of the auto- Y – 0~255 to set the output range within 3.50~ 5
247 toner sensor M – 0~255 4.50V automatically (about 2 min.). As 5
248 C – 0~255 the value increases, the sensor ouptut 5
249 K – 0~255 increases correspondingly.) (No deve- 5
250 Color (Y,M,C) – 0~255 loper filling is carried out.) 5
252-0 Main charger bias Y 250 0~999 Actual output voltage of main charger 4
252-1 output voltage 1 (lower) M 250 0~999 grid bias. After replacing the main high- 4
252-2 C 250 0~999 voltage transformer, enter the value ac- 4
252-3 K 250 0~999 cording to the supplementary data sheet. 4
253-0 Main charger bias Y 900 0~999 4
253-1 output voltage 2 (upper) M 900 0~999 4
253-2 C 900 0~999 4
253-3 K 900 0~999 4
257-0 Developer bias DC(-) Y 100 0~999 Actual output voltage of the developer 4
257-1 output voltage 1 (lower) M 100 0~999 bias. After replacing the main high- 4
257-2 C 100 0~999 voltage transformer, enter the value ac- 4
257-3 K 100 0~999 cording to the supplementary data sheet. 4
258-0 Developer bias DC(-) Y 700 0~999 4
258-1 output voltage 2 (upper) M 700 0~999 4
258-2 C 700 0~999 4
258-3 K 700 0~999 4
Adjustment mode (05)
Accep-
Code Description/Mode
Default
table Contents
Proce-
Value
dure