Filter
Top Products
February 2002 © TOSHIBA TEC 5 - 25 FC-210/310 UPDATING THE FIRMWARE
Version of the firmware
installed
Firmware Version Up Mode
Target: 1
Firmware version up completed.
Version: 001.003 code:U
> Press START key to continue.
7. The following will be displayed when the firmware update is completed successfully.
In case of target 1 - 13:
If you continue to update the other areas, press the [START] key and perform the step 5 and the
followings for each area.
Turn OFF the power or press the [CLEAR] key to exit the update screen.
Destination code of the
firmware installed
In case of target #1 - #5:
The following is displayed when the updating is finished.
Firmware Version Up Mode
Target: #1
Firmware version up completed.
target version code
1 001.002 U
2 002.001 0
3 002.031 0
4 003.022 2
5 003.022 3
6 003.033 6
Press START key to next.
Version of the firmware updated
Firmware Version Up Mode
Target: 1
Program canceled.
8. Press the [CLEAR] key to cancel the updating process.
However, it cannot be canceled once the data elimination process on the flash ROM is started.
Destination code of the
firmware installed