Filter
Top Products
February 2002 © TOSHIBA TEC 1 - 25 FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
461 Color registration status display 0 0~255 The value of Y(0) shows the error status 10
of the color registration sensor.
0 / 16 or above: Normal
1~14: Data abnormal (sensor normal)
15: Color registration pattern reading
error
470 Adjustment of primary-scan- K 100 0~255 When the value increases by 1, the im- 1
ning laser writing start position age shifts by approx. 0.042mm toward
the right side of paper feed direction.
474 Adjustment of secondary-scan- 8 1~15 When the value increases by 1, the im- 1
ning laser writing start position age shifts by approx. 0.6mm toward the
leading edge of paper feed direction.
482 Reproduction ratio adjustment of 127 112~ When the value increases by 1, the re- 1
the primary-scanning direction 142 production ratio of the primary-scanning
(scanner section) direction (paper feeding in horizontal
direction) decreases by 0.082%.
491 Adjustment of the Thick paper 3 9 0~14 When the value increases by 1, the time 1
pushing amount bypass feeding period the bypass feed roller is driven
from behind when the paper has started to be trans-
ported from the registration section in-
creases by 7ms.
492 Paper aligning amout adjustment 40 0~50 When the value increases by 1, the ali- 1
(OHP bypass feeding) gning amount increases by about
0.8mm.
493 Adjustment of the OHP 9 0~14 When the value increases by 1, the time 1
pushing amount bypass feeding period the bypass feed roller is driven
from behind when the paper has started to be trans-
ported from the registration section in-
creases by 7ms.
494 LCF 0 0~12 When the value increases by 1, the time 1
period the LCF feed roller is driven
when the paper has started to be trans-
ported from the pre-feed roller section in-
creases by 50ms.
495 Thin paper 0 0~14 When the value increases by 1, the time 1
bypass feeding period the bypass feed roller is driven
496 Normal paper 9 0~14 when the paper has started to be trans- 1
bypass feeding ported from the registration section in-
497 Thick paper 1 9 0~14 creases by 7ms. 1
bypass feeding
498 Thick paper 2 9 0~14 1
bypass feeding
Adjustment mode (05)
Accep-
Code Description/Mode
Default
table Contents
Proce-
Value
dure