Filter
Top Products
FC-210/310 UPDATING THE FIRMWARE 5 - 4 February 2002 © TOSHIBA TEC
5.1.3 Dial-up networking function
The settings necessary for the PPP are described in this section. The dial-up networking function is
used to perform the PPP connection on the Windows 95/98.
(1) Virtual modem
Since a modem is supposed to be used for the Windows 95/98 dial-up networking, download a virtual
modem to enable the connection performed directly with a serial cable.
(2) Installation of virtual modem
Download the following file from the web.
URL:http://www.kevin-wells.com/net/mdmcbx4.inf
After the above file was downloaded, install the modem as follows.
Click the “Modems” button on the Control Panel to display the following window, then click [Add].