Filter
Top Products
FC-210/310 ADJUSTMENT 2 - 16 February 2002 © TOSHIBA TEC
2.5.4 Scanner related adjustment
(a) Image distortion adjustment
Note: The screws on the rear side of mirror-1 and -3 must not be adjusted.
<Procedure>
Remove the original glass and the left top cover,
and then move carriage-1 toward the paper exit
side until it stops. Insert a plus type screwdriver
through the hole of the indicator unit to adjust the
screws as per step 1 to step 2 below.
Step 1
In case of Ꭽ:
Tighten the mirror-2 adjustment screw (CW).
ৎ Go to Ꭿ
In case of Ꭾ:
Loosen the mirror-2 adjustment screw (CCW).
ৎ Go to ൳
Image
Ꭽ
Ꭾ
Mirror-2
Feeding direction
Feeding direction
Step 1
Step 2
Ꭿ
൳