Filter
Top Products
February 2002 © TOSHIBA TEC 4 - 51 FC-210/310 TROUBLESHOOTING
[CD9] Swing motor abnormal
[Procedure 1]
Rotate the swing motor in reverse by hand. Does the swing guide move up and down?
NO
Correct the swing mechanism.
YES
Is the swing guide closed detection switch-2 (MS6) working normally?
NO
Replace the switch.
YES
Is the swing guide open sensor (PI18) working normally?
NO
Replace the sensor.
YES
Is the swing motor (M7) rotating in reverse at the specified timing?
NO
Replace the motor.
YES
End
[Procedure 2]
Is the safety zone switch (MS3) working normally?
NO
Replace the switch.
YES
Is the safety zone switch (MS3) correctly pressed?
NO
Correct the mechanism.
YES
Is the swing guide closed detection switch-2 (MS6) working normally?
NO
Replace the switch.
YES
Is the swing guide closed detection switch-2 (MS6) correctly pressed?
NO
Correct the mechanism.
YES
Replace the finisher controller PC board.