Filter
Top Products
FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
1 - 30 February 2002 © TOSHIBA TEC
794-0 Color balance Text/ L 128 0~255 When the value increases, the target 4
794-1 adjustment Photo M 128 0~255 color, the original mode and the density 4
794-2 (K) H 128 0~255 area become darker. 4
795-0 Text L 128 0~255 4
795-1 M 128 0~255 Notes: 4
795-2 H 128 0~255 L: Low density area 4
796-0 Printed L 128 0~255 M: Medium density area 4
796-1 image M 128 0~255 H: High density area 4
796-2 H 128 0~255 4
797-0 Photo L 128 0~255 4
797-1 M 128 0~255 4
797-2 H 128 0~255 4
798-0 Map L 128 0~255 4
798-1 M 128 0~255 4
798-2 H 128 0~255 4
817 Output value display When the light – 0~1023 Displays the output value of image qua- 2
of image quality source is OFF lity sensor when the sensor light source
sensor is OFF.
818 Transfer belt – 0~1023 Displays the output value of image qua- 2
surface lity sensor (when there is no test pattern)
on the transfer belt.
819 Low-density – 0~1023 Displays the output value of image qua- 10
pattern lity sensor when a low-density test pat-
tern is written.
820 High-density – 0~1023 Displays the output value of image qua- 10
pattern lity sensor when a high-density test pat-
tern is written.
821 Light amount adjustment results of – 0~255 This sensor's LED light amount adjust- 2
image quality sensor ment value is the reference value for
setting the reflected light amount from
the belt surface.
822 Output value Medium-density – 0~1023 Displays the output value of image qua- 10
display of image pattern lity sensor when a medium-density test
quality sensor pattern is written.
878 Forced performing of – – Performs the image quality control. 6
image quality control
879 Automatic initialization of – – Performs the image quality control and 6
image quality control restore the initial value.
912-0 Magazine sort/ A4-R/LT-R 0 -14~14 When the value increases by 1, the 4
912-1 fine adjustment of B4 0 -14~14 folding and stapling position shift by 4
912-2 folding and stapling A3/LD 0 -14~14 approx. 0.25mm toward the right page. 4
position
Adjustment mode (05)
Accep-
Code Description/Mode
Default
table Contents
Proce-
Value
dure