Filter
Top Products
February 2002 © TOSHIBA TEC 1 - 23 FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
361 Transfer bias Normal paper K 49 0~255 The bias value of the transfer roller is 1
output adjust- mode / Thin set. The higher the value, the larger the
ment (Black) paper mode transformer output becomes. This ad-
363 Thick paper 1 K 49 0~255 justment value becomes effective only 1
mode when the setting mode (08-400, 401,
364 OHP mode K 69 0~255 409) is 0 (disabled). 1
365 Thick paper 2 K 59 0~255 1
mode
367-0 Transfer bias output Y 589 0~5000 Actual output voltage of the transfer 4
367-1 voltage 1 (lower) M 589 0~5000 roller bias. After replacing the transfer 4
367-2 C 589 0~5000 transformer, enter the value according to 4
367-3 K 589 0~5000 the supplementary data sheet. 4
368-0 Transfer bias output Y 3929 0~5000 4
368-1 voltage 2 (upper) M 3929 0~5000 4
368-2 C 3929 0~5000 4
368-3 K 4715 0~5000 4
381 Transfer bias output Thick Y 89 0~255 The bias value of the transfer roller is 1
382 adjustment paper 3 M 89 0~255 set. The higher the value, the larger the 1
383 (Full color) mode C 89 0~255 transformer output becomes. The ad- 1
384 K 89 0~255 justment value becomes effective only 1
385 Transfer bias output Thick K 79 0~255 when the setting mode(08-400, 401, 1
adjustment paper 3 409) is 0 (disabled).
(Black) mode
391 Automatic removing Color (Y, M, C) – – The developer material in the developer 6
392 of developer mate- K – – unit is removed into the toner bag. 6
rial
400 Reproduction ratio adjustment of 1222 1209~ When the value increases by 1, the re- 1
primary-scanning direction 1235 production ratio in the primary-scanning
(Fine adjustment of polygonal motor direction (horizontal paper feeding di-
rotation speed) rection) decreases by approx. 0.082%.
(If the values of this code 400 is chang-
ed, the values of code 05-401,402,403,
404,410 and 474 are optimized.)
401 Reproduction ratio adjustment of 1787 1608~ When the value increases by 1, the re- 1
secondary-scanning direction 1965 production ratio in the secondary-scan-
(Fine adjustment of drum motor/ ning direction (vertical paper feeding di-
transfer belt motor rotation speed) rection) decreases by approx. 0.074%.
(If the values of this code 401 is chang-
ed, the values of code 05-402,403,404,
410 and 474 are optimized.)
Adjustment mode (05)
Accep-
Code Description/Mode
Default
table Contents
Proce-
Value
dure