Filter
Top Products
February 2002 © TOSHIBA TEC 1 - 1 FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
Paper transport jam E01 Paper leading edge not reaching the exit sensor
inside the copier E02 Paper trailing edge not passing the exit sensor
E03 Paper remaining inside the copier at power ON
EB7 Restart time-out error
Paper feeding jam E11 Paper misfeed from the ADU
E12 Paper misfeed from the bypass tray
E13 Paper misfeed from the 1st cassette
E14 Paper misfeed from the 2nd cassette
E15 Paper misfeed from the 3rd cassette
E16 Paper misfeed from the 4th cassette
E19 Paper misfeed from the LCF
Paper transport jam E21 Paper transport jam from the LCF
(Paper not reaching the registration E22 Paper transport jam from the 1st cassette
sensor after feeding) E23 Paper transport jam from the 2nd cassette
E24 Paper transport jam from the 3rd cassette
E25 Paper transport jam from the 4th cassette
E26 Paper transport jam from the bypass tray
Cover open jam E41 Front cover opened during printing
E42 Side door opened during printing
E43 ADU pulled out during printing
E45 LCF jam access cover opened during printing
E46 Bypass unit opened during printing
Paper transport jam in the ADU and E50 Paper not reaching the ADU
reversing area E51 Paper not reaching the ADU stack
E52 Paper not reaching the ADU path sensor
E54 ADU paper transport jam
1. ERROR CODES AND SELF-DIAGNOSIS
1.1 Error Code List
In this manual, colors are sometimes described using abbreviations as listed below:
Yellow : Y Magenta : M Cyan : C Black : K
While the “CLEAR PAPER” or “CALL SERVICE” symbol is flashing, pressing the [CLEAR] key and the
digital key [8] at the same time shows one of the following error codes on the copy-quantity indicator as
long as those keys are pressed.
Classification Error code Contents