Filter
Top Products
FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
1 - 24 February 2002 © TOSHIBA TEC
402 Fine adjustment of 3767 0~ When the value increases by 1, the rota- 1
fuser motor rotation speed 65535 tion speed of fuser motor decreases
by 0.026%.
404 Fine adjustment of 9832 0~ When the value increases by 1, the rota- 1
feed motor rotation speed 65535 tion speed of the paper feed motor de-
creases by 0.023%.
406 Registration motor speed adjustment – – The paper transport speed of registra- 15
tion roller in relation to the image print-
ing speed is set at the optimum value.
(If the value of this code 406 is perform-
ed, the values of the code 05-404 and
410 are optimized.)
407 Forced performing of – – Performs the color registration control. 6
color registration control
408 Correction of fuser motor speed 0 0~20 In the thick paper 3 mode, when the 1
(For the Thick paper 3 mode ) value increases by 1, the fuser motor
rotation speed decreases by 0.026%.
410 Fine adjustment of 2853 2567~ When the value increases by 1, the re- 1
registration motor rotation speed 3138 gistration motor rotation speed decreases
by 0.035%. (If the value of this code 410
is performed, the value of the code 05-404
is optimized.
428 Adjustment of image trailing edge 160 0~255 When the value increases by 1, the mar- 1
margin gin at the trailing edge along the paper
feeding direction becomes narrower by
approx. 0.042mm.
439 Paper aligning 1st Long 20 0~40 When the value increases by 1, the ali- 1
440 amount adjustment cassette Short 25 0~40 gning amount increases by about 1
441 2nd Long 20 0~40 0.8mm. 1
442 cassette Short 25 0~40 1
443 3rd Long 20 0~40 Notes: 1
444 cassette Short 25 0~40 Long (= Long size paper) : 1
445 4th Long 20 0~40 Paper length 330mm or longer 1
446 cassette Short 25 0~40 (A3/LD/A3 wide/FULL BLEED) 1
447 ADU Long 20 0~40 Short (= Short size paper) : 1
448 Short 25 0~40 Paper length 220mm ~ 329mm 1
449 LCF 25 0~40 1
450 Bypass feed 35 0~40 1
451 Thick paper 2 40 0~50 1
452 Thick paper 3 40 0~50 1
Adjustment mode (05)
Accep-
Code Description/Mode
Default
table Contents
Proce-
Value
dure