Filter
Top Products
February 2002 © TOSHIBA TEC 5 - 31 FC-210/310 UPDATING THE FIRMWARE
Firmware Version Up Mode
Target: 1
Failed to install a new firmware.
– file read error.
Installation failed
In case of target of 1 - 13:
In case of target #1 - #5:
3’
Error messages
– file read error.
– file information error.
– unfit device.
– device erase error.
– device write error.
– verify error.
– cannot set NvRAM flags.
– Communication error LGC
– Communication error IMC
– Communication error SCM
Power OFF
Power OFF
Firmware Version Up Mode
Target:#1
Failed to install a new firmware.
– file read error.
Target Version code
1 001.002 U
2 error
Error messages
– file read error.
– file information error.
– unfit device.
– device erase error.
– device write error.
– verify error.
– cannot set NvRAM flags.
– Communication error LGC
– Communication error IMC
– Communication error SCM
Area where error
has occurred
Failed
3