Filter
Top Products
FC-210/310 TROUBLESHOOTING 4 - 90 February 2002 © TOSHIBA TEC
1 Does the paper mode correspond to
the paper type?
2 Is paper too dry?
3 Is the transfer belt in proper contact
with the drums?
4 Are there any abnormalities on the
belt?
5 Is the high-voltage transformer output
abnormal?
Cause/Section
Step
Check items Measures
Paper
Transfer belt
High-voltage transformer
(transfer roller)
Check the paper type and mode.
Change paper.
Correct it.
Clean or replace the belt.
Adjust the output. Replace the transformer, if
necessary.
(24) Blotched image
Feeding direction