Filter
Top Products
FC-210/310 TROUBLESHOOTING 4 - 40 February 2002 © TOSHIBA TEC
[CB4] Alignment motor abnormal
Is the alignment guide home position sensor (PI6) working normally?
NO
Replace the sensor.
YES
Is the wiring between the finisher controller PC board and the alignment motor (M3) correct?
NO
Correct the wiring.
YES
Is there any mechanical problem with the alignment guide movement path?
YES
Correct the mechanism.
NO
Is the problem solved by replacing the alignment motor?
NO
Replace the finisher controller PC board.
YES
End
[CB5] Staple motor abnormal
Is the wiring between the stapler and the finisher controller PC board correct?
NO
Correct the wiring.
YES
Is the problem solved by replacing the stapler?
NO
Replace the finisher controller PC board.
YES
End