Filter
Top Products
February 2002 © TOSHIBA TEC 4 - 79 FC-210/310 TROUBLESHOOTING
Cause/Section
Step
Check items Measures
Cassette
LCF
Paper feed roller
Rollers
Registration roller
Pre-registration guide
Original scale
1 Is the cassette or LCF properly
installed?
2 Is too much paper loaded in the
cassette or LCF?
3 Is the paper corner folded?
4 Are cassette or LCF side guides
properly set?
5 Is the surface of paper feed roller
dirty?
6 Is each roller improperly fixed to the
shaft?
7 Is the registration roller spring out of
place?
8 Is the pre-registration guide
improperly installed?
9 Is the original scale slanted?
Reinstall the cassette or LCF properly.
Reduce paper to 600 sheets or less.
(1500 sheets or less for LCF)
Change the paper direction and reinsert it.
Adjust side guides.
Clean the roller surface with alcohol, or
replace the roller.
Check and fasten E-rings, pins, clips and
setscrews.
Mount the spring correctly. Clean the roller if it
is dirty.
Correct it.
Adjust it.
(13) Skew (slantwise copying)
Feeding direction