Filter
Top Products
February 2002 © TOSHIBA TEC 5 - 21 FC-210/310 UPDATING THE FIRMWARE
4. The following is displayed if the serial connection was completed successfully.
You can press [HELP] to confirm the current version (the version before the copier is updated).
*The engine firmware version cannot be displayed in this screen. Use the setting mode to confirm
them.
08-902: Engine ROM version (LGC)
08-903: Printer ROM version (IMC)
08-904: Scanner ROM version (SCM)
Press [HELP] again to return to the above screen.
Firmware Version Up Mode
Target: 1
Established serial connection with PC.
> Press START key to install new
firmwares.
> Please select a target with DIGITAL
keys.
Number of the target area for
updating
Firmware Version Up Mode
Target: 1
Established serial connection with PC.
target version code
1 005.101 U
2 004.001 0
3 005.002 0
4 006.001 6
5 006.001 7
6 006.003 11
Press START key to next.
One of the following is
displayed: U, E or X
Firmware Version Up Mode
Target: 1
Established serial connection with PC.
target version code
7 006.001 8
8 006.001 10
9 006.002 13
10 006.001 3
Press START key to previous.
ৎ
ৎ
[START] key