Filter
Top Products
FC-210/310 ADJUSTMENT 2 - 38 February 2002 © TOSHIBA TEC
(b) Installing the lens unit
Use the positioning pins to install the lens unit. By that the installing position of the lens unit is fixed,
and therefore there is no need to adjust the magnification ratio of the lens.
<Procedure>
1. Insert the positioning pins (front and rear)into the holes of the lens unit (as A in the illustration below),
and install the unit to the base of the scanner unit (note that the shapes of the front positioning pins are
different from that of the rear ones).
2. Fix the 2 long holes (as B in the illustration below) with the screws.
A (Front)
B
A (Rear)
B