Filter
Top Products
FC-210/310 TROUBLESHOOTING 4 - 86 February 2002 © TOSHIBA TEC
Cause/Section
Step
Check items Measures
Adjustment error of
scanner or printer section
Registration roller
Paper feed motor
Pre-registration guide
1 Is same dislocation on every copy?
2 Is the registration roller dirty, or the
spring out of place?
3 Is the registration motor mal-
functioning?
4 Is the paper feed motor mal-
functioning?
5 Is the pre-registration guide
improperly installed?
Adjust the scanner/printer using the
adjustment mode.
Clean the roller with alcohol.
Reinstall the spring.
Adjust or replace the gears, etc. if they are not
engaged properly.
Check the circuit or the motor and replace
them if necessary.
Reinstall the guide.
(20) Image dislocation in feeding direction
Feeding direction