Toshiba FC-210 Copier User Manual


 
FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
1 - 40 February 2002 © TOSHIBA TEC
Setting mode (08)
Accep-
Code Name Default table Contents
Proce-
value
dure
645 Correction of reproduction 10 0 ~ 10 Sets the reproduction ratio for X in 1 copy 1
ratio in the editing copy mode (including magazine sort) to "Reproduction
ratio x Correction ratio (followings)".
0: 90% 1: 91% 2: 92% 3: 93% 4: 94%
5: 95% 6: 96% 7: 97% 8: 98% 9: 99%
10: 100%
646 Image position in the editing 0 0 ~ 1 Sets the image pasting datum for each page 1
copy mode in the X in 1 copy (including magazine sort).
0: Corner (upper left) 1: Center
648 Initializing of the finisher tray 0 0 ~ 1 Sets whether the finisher tray moves to the 1
at Auto-clear 1-bin or not at Auto-clear
0: Not move 1: Move
650 2 in 1 / 4 in 1 setting 0 0 ~ 1 0: Horizontal writing original 1
1: Vertical writing original
653 Copier administrator’s 00000 00000 ~ Sets the password for administrator in the 1
password 99999 department management.
681 Cascade operation setting 0 0 ~ 1 0: OFF 1: ON 1
(printer)
682 Magazine sort setting 0 0 ~ 1 0: Left page to right page 1
1: Right page to left page
683 Cascade operation setting 0 0 ~ 1 0: OFF 1: ON 1
(copier)
684 Summer time function 0 0 ~ 1 0: Not summer time 2
1: Summer time
690 HDD formatting 2 2: Normal format 1
691 HDD status display 0 ~ 2 0: Not formatted 2
2: Normal formatted
693 HDD standby mode 1 0 ~ 10 Sets the time lag before entering the HDD 1
standby status.
* This value may need to be changed when
the HDD is replaced since the characteristics
of HDDs are different among makers.
700 Fuser error status counter 0 0 ~ 9 0: Normal 1:[C41] error 1
2: Continuous [C41] error 3: –
4: [C43] error 5: [C44] error 6: [C42] error
7: [C46] error 8: [C47] error 9: [C48] error