Filter
Top Products
February 2002 © TOSHIBA TEC 5 - 29 FC-210/310 UPDATING THE FIRMWARE
In case of target 1 - 13 :
Firmware Version Up Mode
Target: 1
Installing a new firmware.
– reading a file.
1
Press the [START] key
Installed
successfully
Installation
failed
3
2
2
Press the
[START] key
1
2
Press the
[START] key
Press the
[CLEAR] key
Version of the firmware installed
(Not displayed in case of Target 11 - 13)
Target: 1
on with PC.
Target: 6
on with PC.
Target: #1
on with PC.
Display changes
corresponding to
the keys pressed
1’
Status of updating process (Target 1 - 10)
– reading a file.
– checking a read file.
– checking the device.
– setting NvRAM flags.
– erasing the device.
– writing to the device.
– verifying the device.
– clearing NvRAM flags.
Status of updating process (Target 11 - 13)
– reading a file.
– writing to the device.
Press the
[CLEAR]key
Firmware Version Up Mode
Target: 1
Firmware version up completed.
Version: 001.003 code: U
> Press START key to continue.
Press the
[CLEAR] key
Firmware Version Up Mode
Target: 1
> Press START key to install new firmwares.
> Please select a target with DIGITAL keys.
Press the
digital key
ৎ
ৎ
Destination code of the firmware installed
(Not displayed in case of Target 11 - 13)