Filter
Top Products
FC-210/310 UPDATING THE FIRMWARE 5 - 28 February 2002 © TOSHIBA TEC
Firmware Version Up Mode
Cannot connect with PC.
Failed to install a new firmware.
Power ON
Connection
failed
Connection made
successfully
Number of area to be updated
Target: 1
on with PC.
Target: 6
on with PC.
Target: #1
on with PC.
Display changes
corresponding to the
keys to be pressed.
Firmware Version Up Mode
Target: 1
Program canceled.
1 1’ 2
Press the
[START] key
Press the
[CLEAR] key
2
Press the
[CLEAR] key
Power OFF
Firmware Version Up Mode
> Make a connection from PC.
Firmware Version Up Mode
Target: 1
Established serial connection with PC.
> Press START key to install new
firmwares.
> Please select a target with DIGITAL keys.
5.2.4 Display
The following screens are displayed in the mode [3][9].
Press the
digital key
ৎ
ৎ