Toshiba FC-210 Copier User Manual


 
FC-210/310 SPECIFICATIONS A - 4 February 2002 © TOSHIBA TEC
Mode Power Consumption Warm-up time Efficiency
Level 1
Approx.100W Approx. 2 min 30 sec. Approx. 56%
Energy saving mode
(Approx.135W) (Approx. 48%)
115V series Level 2
Approx.160W Approx. 1 min 15 sec. Approx. 29%
(Approx.195W) (Approx. 25%)
Normal standby
Approx. 225W 0 0%
(Approx.260W) (0%)
Level 1
Approx.100W Approx. 2 min 15 sec. Approx. 57%
Energy saving mode
(Approx.135W) (Approx. 49%)
200V series Level 2
Approx.160W Approx. 1 min 15 sec. Approx. 30%
(Approx.195W) (Approx. 26%)
Normal standby
Approx. 230W 0 0%
(Approx.265W) (0%)
* Values in parentheses ( ) are when the copier is with full options: The automatic document feeder,
automatic duplexing unit, large-capacity feeder, finisher, hole punch unit, cassette modules and AI board
* Level 1: Energy saver mode with priority aim of energy saving
Level 2: Energy saver mode with priority aim of returning to standby
• Weight .................................... Approx. 187 kg/413lb.
• Power requirements ................AC 115V/16A, AC 220 – 240V/9A
• Power consumption ................ 2.0 kW or less (115V series, 200V series)
*
The automatic document feeder, automatic duplexing unit and LCF are supplied with electric
power through the copier.
• Power consumption and warm-up time at energy saving mode
• Capacity for originals ......................
A4, A4-R, B5, B5-R, A5-R, LT, LT-R, ST-R: 50 sheets (64~90g/m
2
) (17~24 lb.)
(Optional automatic document feeder)
40 sheets (91~105g/m
2
) (25~28 lb.)
B4, Folio, LG, Comp: 35 sheets (64~90g/m
2
) (17~24 lb.)
25 sheets (91~105g/m
2
) (25~28 lb.)
A3, LD: 25 sheets (64~90g/m
2
) (17~24 lb.)
20 sheets (91~105g/m
2
)(25~28 lb.)
• Stacking capacity of sheets Paper weight 64~105 g/m
2
, 17~28 lb.: 30 sheets
(Optional automatic duplexing unit)
• Toner supplying ....................... Automatic toner-density detection and supply
Toner cartridge replacing method
• Density control ....................... Automatic density mode and manual density mode selectable in 11 steps