Filter
Top Products
106 AT-TQ2403 - Management Software - User's Guide
Field Description
Broadcast SSID Select the
Broadcas
t
SSID
setting by selecting the Broadcast SSID
checkbox.
By default, the access point broadcasts (allows) the Service Set Identifier
(SSID) in its beacon frames.
You can suppress (prohibit) this broadcast to discourage stations from
automatically discovering your access point. When the AP’s broadcast
SSID is suppressed, the network name will not be displayed in the List of
Available Networks on a client station. Instead, the client must have the
exact network name configured in the supplicant before it will be able to
connect.
Note: The Broadcast SSID you set here is specifically for this Virtual
Network (One or Two). Other networks continue to use the security
modes already configured:
Your original Internal network (configured on Ethernet (Wired)
tab) uses the Broadcast SSID set on Security.
If a Guest network is configured, the Broadcast SSID is always
allowed.
Security Mode Select the Security Mode for this VLAN. Select one of the following:
None (Plain-text)
Static WEP
IEEE802.1x
WPA Personal
WPA Enterprise
Note: The Security mode you set here is specifically for this Virtual
Network. Other networks continue to use the security modes already
configured:
Your original Internal network (configured on Ethernet Settings page)
uses the Security mode set on Security.
If a Guest network is configured, always set the security mode to
"None".
Updating Settings
To update VLAN settings:
1. Navigate to the VWN tab page.
2. Configure the VWN settings as required.
3. Click the Update button to apply the changes.