Filter
Top Products
AT-TQ2403 Management Software User's Guide 173
To use t
his type of security, you must do the following:
1. Add the AT-TQ2403 Wireless Access Point to the list of RADIUS server clients. (There are some
kind of Radius server support EAP-SIM, such as : FreeRadius)
2. Configure the AT-TQ2403 Wireless Access Point to use your RADIUS server (by providing the
RADIUS server IP address as part of the "WPA/WPA2 Enterprise [RADIUS]" security mode
settings).
3. Configure wireless clients to use WPA security and "EAP-SIM" as described in this section.
4. Connect USB card reader with SIM card to the wireless client PC.
If you configured the AT-TQ2403 Wireless Access Point to use WPA/WPA2 Enterprise (RADIUS)
security mode with an external RADIUS server.
Figure 73: Security Setting Page – WPA Enterprise Setting Page
. . . then configure WPA security with certificate authentication on each client in Intel PROSet as follows.