Filter
Top Products
214 AT-TQ2403 - Management Software - User's Guide
AT-TQ2403# set log relay-host myserver
Specify the Relay Port
To specify the Relay Port for the syslog server:
set log relay-port Number_Of_LogRelayPort
Where Number_Of_LogRelayPort is the port number for the Log Relay Host.
For example:
AT-TQ2403# set log relay-port 514
Review Log Settings After Configuring Log Relay Host
To view the current log settings:
AT-TQ2403# get log
Property Value
-----------------------------------
depth 128
persistence no
severity 7
relay-enabled 1
relay-host myserver
relay-port 514
From the above output for the "get log" command, you can identify the following about the Log Relay
Host (syslog server):
The syslog server is enabled (because "relay-enabled" is set to "1")
The syslog server is at the IP address 10.10.5.220
The AP is listening for syslog messages on the default port 514
Get Transmit / Receive Statistics
AT-TQ2403# get interface wlan1 ip mac ssid tx-packets tx-bytes tx-errors rx-packets
rx-bytes rx-errors
Property Value
------------------------------------
ip 0.0.0.0
mac 00:01:02:03:02:10
ssid allied
tx-packets 191
tx-bytes 30336
tx-errors 0
rx-packets 188
rx-bytes 26818
rx-errors 0
Get Client Associations
AT-TQ2403# get association
interface station authenticated associated rx-packets