Filter
Top Products
AT-TQ2403 Management Software User's Guide 239
wpa-
personal
The following command gets details on how the internal network is configured, including details on
Security.
AT-TQ2403# get bss wlan0bssInternal detail
Property Value
--------------------------------------------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:01:02:03:02:00
dtim-period 2
max-stations 2007
ignore-broadcast-ssid off
mac-acl-mode deny-list
mac-acl-name default
radius-accounting off
radius-ip 127.0.0.1
radius-key secret
radius-port 1812
radius-accounting-port 1813
vlan-tagged-interface br0
open-system-authentication on
shared-key-authentication off
wpa-allow-non-wpa-stations off
wpa-cipher-tkip on
wpa-cipher-ccmp on
wpa-allowed on
wpa2-allowed on
rsn-preauthentication off
Set Security to WPA/WPA2 Enterprise (RADIUS)
1. Set the Security Mode
2. Set the WPA Versions
3. Enable Pre-Authentication
4. Set the Cipher Suites
5. Set the Authentication Server
6. Set the RADIUS Key (For External RADIUS Server Only)
7. Enable RADIUS Accounting (External RADIUS Server Only)
8. Allow Non-WPA Clients
9. Get Current Security Settings After Re-Configuring to WPA/WPA2 Enterprise (RADIUS)
1. Set the Security Mode
AT-TQ
2403# set interface wlan0 security wpa-enterprise