Filter
Top Products
224 AT-TQ2403 - Management Software - User's Guide
Feature or Setting CLI Command
Enable or Disable a VWN set vwn vwnx status up
This will enable VWN x.
set vwn vwnx status down
This will disable VWN x.
Where x is the VWN number. The VWN number can be
between 1 and 14.
Get the VLAN ID of a VWN get vwn vwnx vlan-id
Where x is the VWN number. The VWN number can be
between 1 and 14.
Set the VLAN ID of a VWN set vwn vwnx vlan-id
Where vlan-id is a value between 1 and 4096.
Get the SSID of a VWN get interface wlan0vwnx ssid
Where x is the VWN number. The VWN number can be
between 1 and 14.
Set the SSID for a VWN
set interface wlan0vwnx ssid ssid
set interface wlan1vwnx ssid ssid
(You must set the SSID on both radios on an AP)
Where x is the VWN number and ssid is the ssid for the
VWN. The VWN number can be between 1 and 14. The ssid
can be any alphanumberic string up to 32 characters.
Determine whether Broadcast SSID is
enabled
get bss wlan0bssvwn<x> ignore-broadcast-ssid
Enable or Disable the Broadcast SSID
Disable Broadcast SSID
set bss wlan0bssvwnx ignore-broadcast-ssid on
set bss wlan1bssvwnx ignore-broadcast-ssid on
(You must disable both radios)
Enable Broadcast SSID
set bss wlan0bssvwnx ignore-broadcast-ssid off
set bss wlan1bssvwnx ignore-broadcast-ssid off
(You must enable both radios)