Filter
Top Products
AT-TQ2403 Management Software User's Guide 251
Radio Mode Basic Rates Supported Rates
g
(IEEE 802.11g)
11, 5.5, 2, 1 Mbps 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1
Mbps
Note: Including rates 24, 12, and 6 as
Supported Rates for "g" mode will
prevent "b" clients from connecting
since they do not support these rates,
but will allow "g" clients to connect
since they are required by the standard
to support these rates.
turbo-a
(Atheros Turbo 5 GHz)
48, 24, 12 Mbps 108, 96, 72, 48, 36, 24, 18, 12 Mbps
dynamic-turbo-a
(Atheros Dynamic Turbo
5GHz / IEEE 802.11a)
24, 12, 6 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps
turbo-g
(Atheros Turbo 2.4 GHz /
IEEE 802.11g))
48, 24, 12 Mbps 108, 96, 72, 48, 36, 24, 18, 12 Mbps
dynamic-turbo-g
(Atheros Dynamic Turbo 2.4
GHz / IEEE 802.11g)
11, 5.5, 2, 1 Mbps 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1
Mbps
The following command adds "48" as a basic rate to wlan0 (the internal, wireless interface):
AT-TQ2403# add basic-rate wlan0 rate 48
To get the basic rates currently configured for this AP:
AT-TQ2403# get basic-rate
name rate
-----------
wlan1 11
wlan1 5.5
wlan1 2
wlan1 1
wlan0 24
wlan0 12
wlan0 6
wlan0 48
The following command removes "11" as a basic rate from wlan1 (the internal, wireless interface):
AT-TQ2403# remove basic-rate wlan1 rate 11
The following command shows that basic rate "11"has been removed from wlan1 and displays the
currently configured rates for this AP: