Filter
Top Products
88 AT-TQ2403 - Management Software - User's Guide
Chapter 11: Setting the Ethernet (Wired)
Interface
Ethernet (Wired) Settings describe the configuration of your Ethernet local area network (LAN).
Note: The Ethernet Settings, including guest access, are not shared across the cluster.
These settings must be configured individually on the Administration pages for each
access point. To get to the Administration pages for an access point that is a member of
the current cluster, click on its IP Address link on the Cluster > Access Points page of
the current AP. For more information about which settings are shared by the cluster and
which are not, see “Which Settings are Shared as Part of the Cluster Configuration and
Which Are Not?”
The following sections describe how to configure "Wired" address and related settings on the
AT-TQ2403 Management Software:
Navigating to Ethernet (Wired) Settings
Setting the DNS HostName
Enabling or Disabling Guest Access
Configuring an Internal LAN and a Guest Network
Enabling or Disabling Guest Access and Choosing a Virtual Network
Enabling or Disabling Virtual Wireless Networks on the AP
Enabling or Disabling Standby Power Saving
Configuring LAN or Internal Interface Ethernet Settings
Configuring Guest Interface Ethernet (Wired) Settings
Updating Settings
Navigating to Ethernet (Wired) Settings
To set the wired address for an access point, navigate to the Manage > Ethernet Settings tab, and
update the fields as described below.