Filter
Top Products
AT-TQ2403 Management Software User's Guide 23
4. Review the list of access points found
Kick Start detects the IP addresses of AT-TQ2403 Management Software. Access points are listed
with their locations, media access control (MAC) addresses, and IP addresses, as shown in Figure 2.
If you are installing the first access point on a single-access-point network, only one entry is
displayed on this screen.
5. Verify the MAC addresses against the hardware labels for each access point. This will be especially
helpful later in providing or modifying the descriptive Location name for each access point.
6. Click Next
The Administration dialog box opens, as shown in Figure 3.
Figure 3: Administration Dialog Box
Note: Kick Start provides a link to the AT-TQ2403 Management Software web pages via
the IP address of the firs
t access point of each model. (For more information about model
types and clustering see “What Kinds of APs Can Cluster Together?
”.)
The AT-TQ2403 Management Software is a centralized management tool that you can access through
the IP address for any access point in a cluster.
After your other access points are configured, you can also link to the AT-TQ2403 Management
Software web pages using the IP address for any of the other AT-TQ2403 Management Software, for
example http://IPAddressOfAccessPoint.
Logging in to the AT-TQ2403 Management Software
To access the AT-TQ2403 Management Software, perform the following procedure:
7. In the Kick Start Administration dialog box, click Administration
You are prompted for a user name and password, as shown in Figure 4.
Username: manager