Filter
Top Products
AT-TQ2403 Management Software User's Guide 217
Feature or Setting CLI Command
Deny Management via WLAN Enable:
set management deny-wlan-management-enabled 1
Ping
Telnet
HTTP
SNMP
TFTP
Deny:
set management deny-wlan-management-ping 1
set management deny-wlan-management-telnet 1
set management deny-wlan-management-http 1
set management deny-wlan-management-snmp 1
set management deny-wlan-management-tftp 1
Get/Change the Connection Type
(DHCP or Static IP)
See detailed example in “Get/Change the Connection Type (DHCP
or Static IP)
”.
Re-Configure Static IP Addressing
Values
For detailed examples see:
“Set the Static IP Address”
“Set the Static Subnet Mask Address
”
“Set the IP Address for the Default Gateway
”
Set DNS Nameservers to Use
Static IP Addresses (Dynamic to
Manual Mode)
See example below.
Set DNS Nameservers to Use
DHCP IP Addressing (Manual to
Dynamic
See example below.
Configure VWNs See “Configuring Virtual Wireless Networks(VWNs)”
Get the DNS Name
AT-TQ2403# get host id
AT-TQ2403
Set the DNS Name
AT-TQ2403# set host id vicky-ap
vicky-ap# get host id
vicky-ap
Get/Change the Connection Type (DHCP or Static IP)