Filter
Top Products
164 AT-TQ2403 - Management Software - User's Guide
1. Configure the following settings on the Association tab on the Network Properties dialog.
Association Tab
Field Setting
Network Authentication Open
Data Encryption WEP
Note: An RC4 stream cipher is used to encrypt the frame body and
cyclic redundancy checking (CRC) of each IEEE 802.11 frame. This is
the same encryption algorithm as is used for Static WEP; therefore,
the data encryption method configured on the client for this mode is
WEP.
This key is provided for me
automatically
Enable (click to check) this option.
2. Configure these settings on the Authentication tab.
Authentication Tab
Field Setting
Enable IEEE 802.1x
authentication for this
network
Enable (click to check) this option.
EAP Type Choose Smart Card or other Certificate
3. Click Properties to bring up the Smart Card or other Certificate Properties dialog and enable the
"Validate server certificate" option.
Smart Card or other Certificate Properties Dialog
Field Setting
Validate Server
Certificate
Enable this option (click to check the box).
Certificates In the certificate list shown, select the certificate for this client.
Click OK on all dialogs to close and save your changes.
4. To complete the client configuration you must now obtain a certificate from the RADIUS server
and install it on this client. For information on how to do this see “Obtaining a TLS-EAP Certificate
for a Client”.
Connecting to the Wireless Network with an IEEE 802.1x Client Using a Certificate
IE
EE 802.1x clients should now be able to connect to the access point using their TLS certificates. The
certificate you installed is used when you connect, so you will not be prompted for login information.
The certificate is automatically sent to the RADIUS server for authentication and authorization.