Filter
Top Products
AT-TQ2403 Management Software User's Guide 257
Feature or Setting CLI Command
Setting Minimum and Maximum
Contention Windows (cwmin, cwmax)
On the AP:
set tx-queue wlan0 with queue Queue_Name to
cwmin cwmin_Value cwmax cwmax_Value
On a client station:
set wme-queue wlan0 with queue Queue_Name to
cwmin cwmin_Value cwmax cwmax_Value
See examples in “Setting Minimum and Maximum Contention
Windows (cwmin, cwmax)”.
Set the Maximum Burst Length (burst)
on the AP
set tx-queue wlan0 with queue Queue_Name to burst
burst_Value
See examples in “Set the Maximum Burst Length (burst) on the
AP”.
Set Transmission Opportunity Limit
(txop-limit) for WMM client stations
set wme-queue wlan0 with queue Queue_Name to
txop-limit txop-limit_Value
See examples in “Set Transmission Opportunity Limit
(txop-limit) for WMM client stations”.
Enable/Disable Wi-Fi Multimedia
By default, Wi-Fi MultiMedia (WMM) is disabled on the access point. With WMM enabled, QoS settings
on the AT-TQ2403 Management Software control both downstream traffic flowing from the access
point to client station (AP EDCA parameters) and upstream traffic flowing from the station to the access
point (station EDCA parameters). Enabling WMM essentially activates station-to-AP QoS control.
Disabling WMM will deactivates QoS control of "station EDCA parameters" on upstream traffic flowing
from the station to the access point. With WMM disabled, you can still set downstream AP-to-station
QoS parameters but no station-to-AP QoS parameters.
To disable WMM:
AT-TQ2403# set radio wlan0 wme off
AT-TQ2403# get radio wlan0 wme
off
To enable WMM:
AT-TQ2403# set radio wlan0 wme on
AT-TQ2403# get radio wlan0 wme
on
About AP and Station EDCA Parameters
AP Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the access
point to the client station (AP-to-station).