Filter
Top Products
120 AT-TQ2403 - Management Software - User's Guide
Using Pre-Config Rogue AP
Field Description
AP Detection To set AP Detection, click Enabled.
Detection Interval Use the drop-down menu to specify the schedule for AP Detection.
A range of intervals is provided, from "15 Minutes" to "4 Weeks". The
default is "15 Minutes"
Access Points List To add a MAC Address to the Access Point List, enter the 48-bit MAC
address into the lower text boxes, then click Add.
The MAC Address is added to the Access Point List.
To remove a MAC Address from the Access Point List, select the 48-bit
MAC address, then click Remove.
Only 200 MAC addresses are allowed.
Updating Settings
To update Rouge AP settings:
1. Navigate to the Pre-Config Rogue AP tab page.
2. Configure the Pre-Config Rogue AP settings as required.
3. Click the Update button to apply the changes.