Filter
Top Products
AT-TQ2403 Management Software User's Guide 87
Field Description
Band This indicates the IEEE 802.11 mode being used on this access point. (For example, IEEE
802.11a, IEEE 802.11b, IEEE 802.11g.)
The number shown indicates the mode according to the following map:
2.4 indicates IEEE 802.11b mode or IEEE 802.11g mode
5 indicates IEEE 802.11a mode
5 Turbo indicates Atheros Turbo 5 GHz mode
Channel Shows the channel on which the access point is currently broadcasting.
The Channel defines the portion of the radio spectrum that the radio uses for
transmitting and receiving.
The channel is set in Radio Settings. (See “Configuring Radio Settings”.)
Rate Shows the rate (in megabits per second) at which this access point is currently
transmitting.
The current rate will always be one of the rates shown in Supported Rates.
Signal Indicates the strength of the radio signal received from this access point. According to
the strength, show as an icon with 1~4 bars.
# of Beacons Shows the total number of beacons transmitted by this access point since it was last
booted.
Last Beacon Shows the date and time of the most recent beacon that was transmitted from the access
point.
Rates Shows supported and basic (advertised) rate sets for the neighboring access point. Rates
are shown in megabits per second (Mbps).
All Supported Rates are listed, with Basic Rates shown in bold.
Rate sets are configured on Radio Settings. (See “Configuring Radio Settings
”.) The rates
shown for an access point will always be the rates currently specified for that AP in its
Radio Settings.