Filter
Top Products
AT-TQ2403 Management Software User's Guide 129
Field Description
Max. Burst Length AP EDCA Parameter Only (The Max. Burst Length applies only to
traffic flowing from the access point to the client station.)
This value specifies (in milliseconds) the Maximum Burst Length
allowed for packet bursts on the wireless network. A packet burst is a
collection of multiple frames transmitted without header information.
The decreased overhead results in higher throughput and better
performance.
Valid values for maximum burst length are 0.0 through 999.9.
For more information, see “Packet Bursting for Better Performance
”.
Enabling/Disabling Wi-Fi Multimedia
By default, Wi-Fi MultiMedia (WMM) is enabled on the access point. With WMM enabled, QoS
prioritization and coordination of wireless medium access is on. With WMM enabled, QoS settings on
the AT-TQ2403 Management Software control downstream traffic flowing from the access point to client
station (AP EDCA parameters) and the upstream traffic flowing from the station to the access point
(station EDCA parameters).
To disable WMM extensions, click Disabled.
To enable WMM extensions, click Enabled.
Configuring Station EDCA Parameters
Station Enhanced Distributed Channel Access (EDCA) Parameters affect traffic flowing from the client
station to the access point.