Filter
Top Products
AT-TQ2403 Management Software User's Guide 243
Note: RADIUS accounting is not supported by the bu
ilt-in server, so if you are using the
built-in server make sure that RADIUS accounting is off.
Feature or Setting CLI Command
To enable RADIUS accounting: set bss wlan0bssInternal radius-accounting on
To disable RADIUS accounting: set bss wlan0bssInternal radius-accounting off
For our example, we’ll enable RADIUS accounting for our external RADIUS server:
AT-TQ2403# set bss wlan0bssInternal radius-accounting on
8. Allow Non-WPA Clients
You can let n
on-WPA (802.11), un-authenticated client stations use this access point by setting the
"wpa- allowed" option to "on".
Feature or Setting CLI Command
To allow non-WPA clients: set bss wlan0bssInternal wpa-allowed on
To disallow non WPA clients: set bss wlan0bssInternal wpa2-allowed off
For our example, we’ll allow non-WPA clients:
AT-TQ2403# set bss wlan0bssInternal wpa-allow-non-wpa-stations on
9. Get Current Security Settings After Re-Configuring to WPA/WPA2 Enterprise (RADIUS)
Now we can use the "get" command again to view the updated security configuration and see the results
of our new settings.
The following command gets the security mode in use on the Internal network:
AT-TQ2403# get interface wlan0 security
wpa-enterprise
The following command gets details on how the internal network is configured, including details on
security.
AT-TQ2403# get bss wlan0bssInternal detai
Property Value
----------------------------------------------------------------
status up
description Internal
radio wlan0
beacon-interface wlan0
mac 00:01:02:03:02:00
dtim-period 2
max-stations 2007
ignore-broadcast-ssid off
mac-acl-mode deny-list