Filter
Top Products
AT-TQ2403 Management Software User's Guide 187
Appendix C: Command Line Interface (CLI)
for AP Configuration
In addition to the Web based user interface, the AT-TQ2403 Management Software includes a
command line interface (CLI) for administering the access point. The CLI lets you view and modify status
and configuration information.
From the client station perspective, even a single deployed AT-TQ2403 Management Software
broadcasting its "network name" to clients constitutes a wireless network. Keep in mind that CLI
configuration commands, like Web UI settings, can affect a single access point running in stand-alone
mode or automatically propagate to a network of clustered access points that share the same settings.
(For more information on clustering, see “Managing Access Points and Clusters
”.
The following topics provide an introduction to the class structure upon which the CLI is based, CLI
commands, and examples of using the CLI to get or set configuration information on an access point or
cluster of APs:
Comparison of Settings Configurable with the CLI and Web UI
How to Access the CLI for an Access Point
Quick View of Commands and How to Get Help
Command Usage and Configuration Examples
Access Point and Cluster Settings
Ethernet (Wired) Interface
Wireless Interface
Configuring Virtual Wireless Networks (VWNs)
Security
Radio Settings
MAC Filtering
Load Balancing
Quality of Service
Wireless Distribution System (WDS)
Simple Network Management Protocol (SNMP)
Time Protocol
Pre-Config Rogue AP
Reboot the AP
Reset the AP to Factory Defaults