Filter
Top Products
AT-TQ2403 Management Software User's Guide 193
CLI
Command
Description
get The "get" command allows you to get the property values of existing instances of a
class.
Classes can be "named" or "unnamed". The command syntax is:
get unnamed-class [ property ... | detail ]
get named-class [ instance | all [ property ... | name | detail ] ]
The rest of the command line is optional. If provided, it is either a list of one or more
properties, or the keyword detail.
An example of using the "get"
command on an unnamed class with a single instance is:
get log
(There is only one log on the AP. This command returns information on the log file.)
An example of using the "get" command on an unnamed class with multiple instances is:
get log-entry
(There are multiple log entries but they are not named. This command returns all log
entries.)
An example of using the "get" command on a named class with multiple instances is:
get bss wlan0bssInternal
(There are multiple bss’s and they are named. This command returns information on
the BSS named "wlan0bssInternal".)
An example of using the "get" command on a named class to get all instances:
get radius-user all name
get radius-user all
Note: "wlan0bssInternal" is the name of the basic service set (BSS) on the internal
network (wlan0 interface). For information on interfaces, see “Understanding
Interfaces as Presented in the CLI”.