Filter
Top Products
200 AT-TQ2403 - Management Software - User's Guide
Feature or Setting CLI Command
Get the Firmware Version for
the Access Point
get system version
Get the Location of the
Access Point
get cluster location
Set the Location for an
Access Point
set system location NewLocation
For example:
set system location hallway
or
set system location "Vicky’s Office"
Set the Password set system password NewPassword
For example:
set system password admin
Get the Wireless Network
Name (SSID)
get interface wlan0 ssid
Set the Wireless Network
Name (SSID)
set interface wlan0 ssid NewSSiD
For example:
set interface wlan0 ssid Vicky
set interface wlan0 ssid "Vicky’s AP"
Get the IP Address for an Access Point
In the following example, the
IP address for the access point is: 192.168.1.230. Use the get command as
shown to obtain the IP address for the management interface.
AT-TQ2403# get management ip
192.168.1.230
Get the MAC Address for an Access Point
In the following
example, the MAC address for the access point is: 00:a0:c9:8c:c4:7e. Use the get
command as shown to obtain the MAC address for the management interface.
AT-TQ2403# get management mac
00:a0:c9:8c:c4:7e
Get Both the IP Address and MAC Address
The fo
llowing command returns both the IP address and the MAC address for an access point:
AT-TQ2403# get management ip mac
Property Value